No More Drive Letters Are Available. Free Up a Drive Letter and Try Again

How to Remove a Drive Letter in Windows 10
By default, Windows 10 volition automatically assign an available bulldoze letter to any connected internal and external storage devices.

Windows progresses through the alphabet from A to Z to assign available bulldoze letters to devices as connected.

Windows usually assigns the drive letters A and B for floppy drives, merely they tin still exist used to manually assign to drives if wanted.

The drive letter of the alphabet C tin only exist used for the bulldoze Windows is installed on. If you multi kicking operating systems, the currently running Windows will always show its drive letter as C.

If non-assigned drives are connected so the letters D onwards are allocated in turn.

If the assigned drive is not continued so Windows will give away its drive letter as office of these allocations.

If the drive with the assigned drive letter is continued subsequently then it volition simply be allocated the side by side letter that happens to be available.

If you remove the drive letter of the alphabet from a volume, partition, or deejay, it will no longer exist available to show equally a drive in File Explorer "This PC".
This tutorial will show you unlike means to remove a bulldoze letter in Windows x.

You must be signed in as an administrator to remove a drive letter of the alphabet.

Contents

Option 1: To Remove Drive Letter in Disk Management

Choice Two: To Remove Drive Letter in Command Prompt using Diskpart

Option 3: To Remove Bulldoze Alphabetic character in Command Prompt using Mountvol

Selection Iv: To Remove Bulldoze Letter of the alphabet in PowerShell

Option Five: Remove Bulldoze Letters of Previously Connected Drives and Disks using DiskPart > automount Command

Pick Six: Remove Drive Letters of Previously Connected Drives and Disks using mountvol Command

Pick Seven: To Remove Drive Letter in Settings

Option One

To Remove Drive Letter in Disk Management

1 Press the Win + R keys to open Run, type diskmgmt.msc into Run, and click/tap on OK to open Deejay Management.

2 Right click or press and hold on the drive (ex: "G") yous want to remove the drive letter of, and click/tap on Modify Drive Letter and Paths. (run across screenshot below)

3 Click/tap on the Remove button. (see screenshot below)

4 Click/tap on Yes to confirm. (see screenshot below)

5 When finished, you tin can shut Disk Direction if you like.

Selection TWO

To Remove Drive Letter in Command Prompt using Diskpart

1 Open an elevated control prompt.

2 Blazon diskpart into the elevated control prompt, and press Enter. (run into screenshot below)

three Blazon listing volume into the elevated control prompt, and press Enter.

iv Make note of the volume number (ex: v) for the bulldoze alphabetic character (ex: "G") you desire to remove.

five Type the command below into the elevated command prompt, and printing Enter.

select volume <volume number>

Substitute <volume number> in the command above with the bodily volume number (ex: "five") from stride four to a higher place for the drive letter of the alphabet (ex: "G") you lot want to remove.

For instance: select book v

vi Type the command below into the elevated command prompt, and press Enter.

remove letter=<drive letter>

Substitute <drive letter of the alphabet> in the command above with the actual drive letter (ex: "G") yous want to remove.

For case: remove letter of the alphabet=Yard

7 When finished, you tin shut the elevated command prompt if yous like.

Option THREE

To Remove Drive Letter in Command Prompt using Mountvol

1 Open an elevated command prompt.

three Blazon the command below into the elevated command prompt, and press Enter. (see screenshot below)

mountvol <Drive Letter>: /d

Substitute <Drive Letter> in the control to a higher place with the bodily bulldoze letter (ex: "Yard") you desire to remove.

For example: mountvol Yard: /d

4 When finished, y'all tin can close the elevated command prompt if you like.

Choice 4

To Remove Drive Letter in PowerShell

1 Open an elevated PowerShell.

ii Blazon Get-Segmentation into the elevated PowerShell, and printing Enter. (see screenshot below)

iii Brand notation of the disk number (ex: "1") and PartitionNumber (ex: "3") for the DriveLetter (ex: "M") y'all desire to remove.

The disks will be listed in numerical social club starting with "0" at the superlative.

four Type the command below into the elevated PowerShell, and printing Enter to verify the disk number (ex: "1") is right for the bulldoze letter (ex: "Yard") you desire to remove.

Go-Deejay <deejay number> | Get-Sectionalization

Substitute <disk number> in the command in a higher place with the bodily disk number (ex: "1") from step 3 above for the drive letter (ex: "Thou") you lot want to remove.

For case: Get-Deejay 1 | Get-Sectionalisation

five Type the command below into the elevated PowerShell, and press Enter to verify the deejay number (ex: "1") is right for the drive letter of the alphabet (ex: "G") you lot want to remove.

Remove-PartitionAccessPath -DiskNumber <disk number> -PartitionNumber <partition number> -Accesspath <drive letter>:

Substitute <disk number> in the control higher up with the actual deejay number (ex: "i") from step iii and verified in footstep 4 above for the bulldoze alphabetic character (ex: "G") y'all want to remove.

Substitute <partition number> in the control above with the actual PartitionNumber (ex: "three") from stride three for the drive letter (ex: "G") you lot desire to remove.

Substitute <bulldoze letter> in the control to a higher place with the actual DriveLetter (ex: "K") from stride 3 in a higher place you want to remove.

For example: Remove-PartitionAccessPath -DiskNumber i -PartitionNumber iii -Accesspath G:

6 When finished, you tin close the elevated PowerShell if y'all like.

OPTION FIVE

Remove Drive Letters of Previously Connected Drives and Disks using DiskPart > automount Command

OPTION Half-dozen

Remove Drive Letters of Previously Continued Drives and Disks using mountvol Command

Pick SEVEN

To Remove Drive Letter in Settings

This pick is just available starting with Windows 10 build 20197.

one Open Settings, and click/tap on the System icon.

ii Click/tap on Storage on the left side, and click/tap on the Manage Disks and Volumes link on the right side. (see screenshot below)

3 Aggrandize open up the disk (ex: "Deejay 2") that contains the book yous want to remove the drive letter from. (see screenshot below)

4 Click/tap on the drive (ex: "F") yous desire to remove the drive letter of the alphabet from, and click/tap on Backdrop. (come across screenshot beneath)

five Click/tap on the Modify bulldoze alphabetic character button nether the Volume Data section. (see screenshot below)

6 Select a None in the drop menu, and click/tap on OK. (see screenshot beneath)

vii You can at present close Settings if you like.

That'due south it,
Shawn

Windows 11 Tutorials